![]() ![]() PTZ enables the operator to create the illusion of a large multi camera production with just 2 PTZ cameras! When the input is not visible in either Preview or Output, a static image of what the camera was seeing when the input was created will be displayed to make it easy to locate a particular camera angle. Step 4 - Repeat steps 2 and 3 to create as many virtual inputs as needed Step 5 - Use these inputs just as you would if multiple real cameras were availableĪny time one of these inputs is selected into Preview, the PTZ camera will automatically move into position. TIP: You can also right click the cog icon underneath the PTZ camera to create PTZ Virtual Inputs without going into Input Settings ![]() You can see these two inputs side by side in the screenshot above. This will create a new input based on the current camera and PTZ position. Step 3 - Click Create Input at this Position ![]() Use the provided controls under the Input Settings PTZ tab to move the camera into the position you wish to create a virtual input for. In vMix, this is relatively straightforward to setup:įollow the instructions under PTZ - Pan Tilt Zoom to enable PTZ control for a particular Camera input. Perhaps the easiest way to control PTZ cameras is to create a number of "Virtual Inputs" for a particular PTZ camera and assign a particular pan, tilt and zoom position when selected. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |